GUIDED TOUR

BASICS

JetConnex replaces the “spaghetti” that connects the vehicle lights to the trailer lights. JetConnex™ can be used with many vehicles that tow trailers including Pick-Up Trucks, SUV’s and big old Caddy’s. The trailers tow boats, jet skis, snowmobiles, car trailers, motorcycles, ATV’s, and bikes.

Bad Wire Bad Taped Wire
JetConnex™

Everyone who tows a trailer has their share of mishap stories--from traffic tickets to accidents to just plain hook-up frustrations--caused by flimsy wire and connections.

The JetConnex™ replaces those flimsy wires that hang down (and drag) between the vehicle and trailer, with a high-quality Tractor-type coil-cord with reliable molded connectors.

THE WIRE

THE JACKET

Start by trying to scratch the jacket with your fingernail. You can’t do it. Why? Because the jacket is made of special hybrid polyurethane mix similar to the material used for skateboard wheels. The jacket will take the toughest beating; protect the wire from water and environmental elements.

The jacket material also gives the JetConnex™ it trademark shine and holds a tight coil through days of hot sun, cold nights and road grime.

WHY THE COIL CORD?

When towing a trailer, you need to have some play in the connecting wire to allow you turn a corner. To accomplish that with spaghetti you let the wire sag across the hitch area. Not only does this look awful, it often ends up dragging on the ground and causing electrical shorts. With the JetConnex™ the coil remains tight and simply stretches when the vehicle turns. …. And it looks sleek and cool.

4 LAYERS OF HIGH TECH PROTECTION

To Protect Our High Signal Strength Copper Conductors

1. JACKET

• Strong, Rugged, Saltwater & Abrasive Resistant, All-Weather Urethane

2. EXTRUDED WATER BARRIER

3. MYLAR WRAP

• To Protect Insulated Wire

4. CONDUCTOR INSULATION

• Impact & Abrasive Resistant

THE CONSTRUCTION

4 layers protect the copper wire of the JetConnex™. This shields it from weather, protects it from breaking and shorting, and reduces the effects of extreme temperatures.

 

THE CONNECTORS
MOLDED STRAIN RELIEFS
all connectors come with a molded strain relief to prevent the wire inside from breaking when the cord is bent near the terminal.

PULL-PROOF PLUGS
On all our molded connectors, a metal ring is wrapped around the wire jacket before the connector is molded to the cord.  This means that the connector is attached to the jacket.  No matter how hard you pull on the connectors you can’t pull the wire out; because you aren’t pulling on the wires, you are pulling on the jacket.
PLATED TERMINALS
We designed the metal contacts to closer tolerance than you find on your normal “spaghetti” wire.  This means that every time you connect and disconnect your JetConnex™ it wipes off the crud and corrosion that builds up on the terminals in harsh conditions causing shorts and electrical failures.